酒店客房布草质量是顾客对一家酒店进行评判的重要因素，选择好的酒店布草对提高酒店形象十分重要。在这里，向您推荐红金顶酒店布草。

The quality of hotel room linen is an important factor for customers to evaluate a hotel, and choosing a good hotel linen is crucial for improving the hotel's image. Here, I would like to recommend the Red Gold Summit Hotel linen to you.

布草质量好坏首先从面料来甄别，而面料的优势主要以经纬密、平方米克重、强力/撕拉力/单纱力、毛羽、色牢度、缩水率、纬斜为主。红金顶与您分享关于选择酒店布草面料几个小知识。

The quality of linen is first judged by the fabric, and the advantages of the fabric mainly include warp and weft density, square meter weight, strength/tear/single yarn strength, fuzziness, color fastness, shrinkage rate, and weft skewness. Hongjinding shares with you a few tips on choosing hotel linen fabrics.

一、经纬密度

1、 Latitude and longitude density

1.指一英寸单位内，棉纱的总根数

1. Refers to the total number of cotton yarns per inch unit

2.工艺书写格式：经向*纬向列如：110*90

2. Process writing format: warp * weft columns, such as 110 * 90

3.通常面料工艺中标识的是胚布的经纬密度，漂染过程会使面料经纬面度发生变化，经向因伸长而减少2-4%，纬向因缩进而增加5%；面料经纬密度的总数不变，或略增加。

3. Usually, the warp and weft density of the raw fabric is marked in the fabric process. The dyeing process will cause changes in the warp and weft flatness of the fabric, with a decrease of 2-4% in the warp direction due to elongation and an increase of 5% in the weft direction due to indentation; The total warp and weft density of the fabric remains unchanged or slightly increases.

4.成品书写格式：T200、T250、T300

4. Finished product writing format: T200, T250, T300

5.国家对经纬密度的标准，是用平方米克重来检验。

5. The national standard for longitude and latitude density is to test it in square meter grams.

红金顶严格按照国家标准对布草的经纬度织造工艺进行把控。

Hongjinding strictly controls the warp and weft weaving process of the fabric according to national standards.

二、面料的强力

2、 The strength of the fabric

1.面料强力分为撕拉强力和单拉强力

1. Fabric strength is divided into tearing strength and single pulling strength

2.撕拉强力是发映面料在出现小面积破损时，破损部位扩张的阻力

2. Tear strength refers to the resistance of the damaged area of the fabric to expand when there is a small area of damage

3.单拉强力是指面料在单位平方米内，能承受的拉力

3. Single tensile strength refers to the tensile force that a fabric can withstand per unit square meter

4.强力的高低主要与棉纱质量（单纱强力）和漂染工艺有关

4. The strength is mainly related to the quality of cotton yarn (single yarn strength) and the bleaching and dyeing process

5.通常好的面料其韧性就比较好，比如红金顶品牌制作的酒店布草面料成品。

5. Generally, good fabrics have better toughness, such as hotel linen fabrics produced by the Red Gold Top brand.

三、平方米克重

3、 Square meter weight

1.能够客观的反映出面料的用纱量（即成本）

1. It can objectively reflect the amount of yarn used in the fabric (i.e. cost)

2.防止用细纱支来代用粗纱支

2. Prevent using fine yarn support instead of coarse yarn support

3.测量的方法是，用圆盘取样器，划取100C㎡的面料进行称重

3. The measurement method is to use a disc sampler to draw a 100C ㎡ fabric and weigh it

4.测验结果对照面料的标准值，常温下40S全棉T250，标准值是：135g/C㎡

4. The test results are compared to the standard value of the fabric, which is 135g/C ㎡ for 40S cotton T250 at room temperature

例如红金顶枕芯的面料平方比克重计算公式为2500-3000g/m2。

For example, the formula for calculating the square specific weight of the fabric for the red gold top pillow core is 2500-3000g/m2.

四、缩水率

4、 Shrinkage rate

1.全棉缩水率一般为：经向5%，纬向5%。

1. The shrinkage rate of cotton is generally 5% in the warp direction and 5% in the weft direction.

2.涤棉缩水率一般为：经向2.5%，纬向2.5%

2. The shrinkage rate of polyester cotton is generally 2.5% in the warp direction and 2.5% in the weft direction

3.做预缩的面料可适当降低缩水率，预缩后全棉经、纬纱缩水率为3.5%

3. For pre shrunk fabrics, the shrinkage rate can be appropriately reduced. After pre shrinking, the shrinkage rate of all cotton warp and weft yarns is 3.5%

红金顶酒店布草温馨提示：您在选购棉质酒店布草尺寸时要考虑棉质布草会有缩水率，详情可咨询红金顶专业布草选购顾问。

Reminder: When choosing the size of cotton hotel linen, you should consider the shrinkage rate of cotton linen. For more details, please consult a professional linen selection consultant at Hongjinding.

五、面料纬斜

5、 Fabric weft diagonal

1.纬斜的计算方法：纬斜幅度/整个门幅

1. Calculation method for latitude deviation: latitude deviation amplitude/entire door width

2.纬斜主要影响产品的平整度效果

2. The skewness of the weft mainly affects the flatness effect of the product

3.目前国内没有一家染厂可以做100%不纬纹斜

Currently, there is no dyeing factory in China that can produce 100% non weft diagonal weave

六、面料毛羽

6、 Fabric fuzziness

1.毛羽是由于短纤维太多造成的布面现象

1. Hairiness is a fabric phenomenon caused by too many short fibers

2.造成的后果：脱毛率高、起球

2. Consequences: High hair removal rate and pilling

红金顶采用的原料是源自公司自有新疆棉基地的优选新疆棉，长绒棉，从原料就对顾客承诺保障红金顶生产的酒店布草经久耐用。

The raw materials used by Hongjinding are selected Xinjiang cotton and long staple cotton from the company's own Xinjiang cotton base. From the raw materials, we promise to ensure that the hotel linen produced by Hongjinding is durable and long-lasting.

第七、色牢度

Seventh, color fastness

色牢度分为：水洗牢度、粘色牢度（指有色产品）

Color fastness is divided into: washing fastness and adhesion fastness (referring to colored products)

本文由酒店布草提供技术支持，更多的详细精彩内容请点击我们的网站http://www.jnadx.com我们将会全心全意为您提供满意的服务。

This article is supported by hotel linens. For more detailed and exciting content, please click on our website http://www.jnadx.com We will wholeheartedly provide you with satisfactory service.